|
 |
ZEISS IKON CONTAX
MECHANICAL RESTORATION OVERHAUL
RENEW THE PERFORMANCE OF YOUR TREASURED CAMERA
APPLIES TO CONTAX IIa & IIIa (POST WAR MODELS)
BLACK DIAL AND COLOR DIAL VERSIONS
FREE RETURN SHIPPING IN
THE USA
$20.00 INTERNATIONAL RETURN
SHIPPING |
 |
 |
| CONTAX IIIa |
CONTAX IIa |
If you have one of the treasured German cameras
of the Golden Age and its has suffered the ravages of time then I can
help you. Bringing 30 years experience servicing fine cameras and lenses from
the most prestigious of manufacturers I can restore you Zeiss Ikon Contax IIa or
IIIa to mechanically perform as new.
The cost for this service is
$119.95
All work is performed using the finest
instrument grade tools and precision measuring and test equipment. All
lubricants used are NYE™ Synthetic
oils and greases, the finest available and far superior to the originals.
 These
lubricants will not oxidize or migrate and will literally last a lifetime in
this application. All parts used a genuine manufacture's and adjustments and
setting are to original specification and in many cases are done to a higher
standard.
The offered overhaul is quite comprehensive and
in most cases will restore you camera to good mechanical operating condition. A
typical overhaul consists of the following:
- Complete disassembly
- Miscellaneous small parts as necessary are included
- Clean, Lube and Adjust all operating assemblies
- Clean optics and treat to prevent fungus
- Disassemble shutter
- Clean and degrease individual components
- Ultrasonically clean slow speed escapement
- Ultrasonically clean selftimer mechanism
- Lubricate all points
- Clean and adjust sync contact
- Adjust shutter speeds
- Adjust curtain travel times
- Calibrate lightmeter (IIIa)
- Clean viewfinder
- Clean rangefinder
- Adjust horizontal plane
- Adjust vertical plane
- Remove deteriorated helicoid grease and relubricate
- Reassemble and check all for Good Working Order
- Clean and Treat exterior leather covering
- Remove Zeiss Bumps if requested
|
|
The turnaround time is 5 business days after
receipt and return shipping United States is included. International
shipping is $20.00
IMPORTANT NOTES:
This service is quite
comprehensive but due to the age of these cameras certain repairs, if necessary
may not be included. Please read the following carefully and
contact me
with any questions.
- Lightmeter repair is limited to
cleaning and calibration only. The lightmeter must be in basic operating
condition. The overhaul will not include a new coil or photocell
- Small parts as necessary will be included at no charge,
these parts include; screws, springs, shims, washers etc.....
- This overhaul is mechanical in nature and while external
cleaning is included cosmetic restoration is not.
- This overhaul will not cover cameras that have water or
liquid damage, damage resulting from impact or similar trauma and cameras that
have been tampered or modified.
- Optical surfaces will be cleaned and treated to prevent the
formation of fungus. I can not recoat or polish optics to remove prior damage
or scratches.
- Cameras performance will be adjusted to original
manufacture's specifications or better
 |
SUBMISSION FORM AND SHIPPING LABEL |
| 
