CLASSIC CAMERA WORKSHOP
P.O BOX 973
HUNTINGDON VALLEY, PA 19006-0973

info@camera-care.com

Phone (215) 470-2198
Fax    
(208) 694-2899

 

 


INFOPHILOSOPHYRESTORATIONCONTACTFAQ

SERVICE INFO

  I now offer mechanical restoration of classic cameras and lenses from many quality manufactures including but not limited to:

  •  NIKON
  • CANON
  • MINOLTA
  • PENTAX
  • KONICA (MOST MODELS)
  • FUJICA
  • LEICA
  • HASSELBLAD
  • MAMIYA (MEDIUM FORMAT ONLY)
  • ROLLEIFLEX
  • VIEW CAMERA LENSES
     
    • PRONTOR
    • COMPUR
    • SEIKO
    • COPAL
  • KODAK RETINA (RANGEFINDER ONLY)
  • VOIGTLÄNDER
  • ZEISS

I ALSO SERVICE MANY OTHER VINTAGE AND COLLECTABLE CAMERAS AND OTHER PHOTOGRAPHIC EQUIPMENT, PLEASE CONTACT ME FOR MORE INFORMATION.

 

SERVICE PHILOSOPHY 

   I have been servicing professional grade photographic equipment for over 30 years and have done work for Associated Press,  United Press International,  US Secret Service, FBI, Philadelphia Inquirer, Franklin Mint and thousands of others. Since I sold my business in 2003 I have been servicing cameras for a select few and now I am expanding my services to include some of the better classic cameras and lenses that deserve to see many years of continued service. Since I now work from my house I can keep prices reasonable and turn around quick. I still use only the finest tools and test equipment and I maintain a large inventory of parts for many of the finest vintage cameras and other photographic equipment.

  If you have one of these fine classic cameras or other photographic equipment please contact me for free advice and a estimate.

Steve Serota
(215) 310-9559

e-mail: classicslr@camera-care.com

 

RESTORATION SERVICES INCLUDE

 I can provide anything from a simple cleaning to a complete mechanical overhaul. I can also repair specific problems and perform various modifications and updates

  •  Cleaning
  • Lubrication
  • Adjustment
  • Light seal renewal with upgraded material or OEM if available
  • Mirror bumper renewal with upgraded material or OEM if available
  • Shutter repair and calibration
  • Meter repair and calibration
  • Modify cameras that use Mercury batteries to work properly with the readily available, correct size, but incorrect voltage alkaline battery
       
    • This modification does not affect the metering curve or sensitivity. The modification provides a regulated voltage drop from 1.55 vdc to the correct 1.35 vdc needed for accurate metering.
  • Some minor cosmetic restoration
  • Leather and leatherette renewal an many cameras
  • Other services
Throughout the restoration process I use Nye synthetic greases and oils. Nye lubricants are among the best available in the world today and exceed and in most cases far exceed manufacturers specifications.  Even though these lubricants are very expensive,  their superior quality, wide temperature range, non-oxidizing characteristics and exceptionally long service life demand and justify their use.

FREQUENTLY ASKED QUESTIONS

  •  Is my camera worth it?

Well that's up to you. For many people these cameras have great sentimental valueand do to the quality with which these cameras were madethey have lasted many decades and with routine service and maintenance can last many more. Many of these cameras, although lacking in many of today's features, are built to a standard that few if any cameras built today can ascribe to. These manual cameras offer many serious photographers the thrill of controlling the image making process, not just going along for the ride.

Another thought to consider is that since 1946 there has not been any real improvement of a camera's ability to render an image on film. Yes, I agree that cameras have gotten easier to use and certainly more affordable but put the same film in a 1955 Leica and any current 35mm camera you choose and I assure you that if anything the vintage 1955 Leica will yield the superior image.  And by going to digital image quality has actually taken a dramatic step backward. So there is a definite logic in keeping your beloved film camera operating at the peak of its performance.

  •  What exactly involved in a restoration?

This varies with the type of camera, the model, and manufacturer. There are general operations that are performed on all cameras;

  1. Disassembly of camera body
  2. Clean and degrease all major operating assemblies
  3. Remove all deteriorated foam seals, strips and bumpers
  4. Renew above seals, strips and bumpers with better than OEM material. Note: If historical accuracy is required I can use manufacture's specification material if available (note: not recommended as this material does not hold up as well as the new material)
  5. Adjust shutter both speeds and curtain travel times
  6. Calibrate meter
  7. Clean focusing screen
  8. Lubricate and adjust advance, shutter, mirror drive etc.........
  9. Check overall operating parameters
  10. Reassemble and check all for Good Working Order
  •  How much does this cost?

This of course varies with make, manufacturer, and the exact amount of work needed to bring the camera back to manufacture's specification. But I can give you a general price range of $75~$100.00. This applies to the vast amount of single lens reflex cameras. If you require a specific dollar amount I will be glad to provide a free estimate upon inspection.

  •  Why do some people seem to do this work for less money?

I have been servicing professional level equipment for over 30 years and you would be amazed at the short cuts and outright butchery I have seen on many cameras. Well put quite simply, I DO NOT TAKE SHORT CUTS. Since I am basically retired* I have plenty of time to do these repairs correctly. Also I have a vast supply of parts that I have acquired over the last quarter century so I can afford to do a through service properly.

*No I am not that oldonly lucky enough to have the time to do what I really enjoy.

  •  If I choose to invest in my film camera how long will it still be usable?

Not being psychic I can't give you an exact time frame but I can certainly offer an educated guess. Film cameras will most likely be usable for many decades to come and then some. If it is any indication, you can still get film in sizes for cameras that haven't be made in over 60 years and many companies―Fuji, Agfa, Kodak, Konica and others―are still bringing out new and improved films even today.

  •  How long does this service take?

At the present time I am returning cameras 3~4 days after payment is received. This time will vary depending on current work load. I will always give you a completion time and generally ship the day of completion. There is rarely a parts delay as I have an incredible parts inventory on hand and I always try to maintain an adequate supply of general items and materials need to properly complete your camera. I  maintain an ongoing relationship with most major camera manufactures and OEM suppliers to insure availability of parts and the latest in service updates and techniques .

CONTACT INFORMATION

Steve Serota
P.O. Box 973
Huntingdon Valley, Pa 19006-0973

(215) 310-9559 Seven days a week 12 Noon~12 Midnight EST  GMT 17:00~05:00

e-mail: classicslr@camera-care.com